Product Selection Guide

2645 Federal Signal Dr., University Park, IL 60484 Tel: +1 708.534.4756 Email: [email protected] www.fedsig.com | 293 Hazardous Location Informer100 Speaker (I-IP100ACX, I-IP100DCX) H O W T O O R D E R Description Part Number 24VDC 100 watt wall mount I-IP100DCX 120/240VAC 100 watt wall mount I-IP100ACX Small (6 " or less) Pole Mount Bracket I-IP100-PM Large (over 6 " ) Pole Mount Bracket I-IP100-PMW Omni Directional Option for IP Speaker I-IP100-OMNI Informer100 Speaker requires Federal Signal Commander application software (sold separately) Informer100 Speaker can be field configured or factory pre-configured to customer requirements. Contact your local representative for a quotation. Control Room Surveillance/Alerting Power Grid Distribution Visual & Audible Signals S E R V I C E P A R T S Description Part Number IP Controller Service Part Q-20000314 AC Speaker Service Part Q-IP100AC DC Speaker Service Part Q-IP100DC Commander is a registered trademark of Federal Signal Corporation. Description Part Number Hazardous Location LED light 24VDC 225XL-024X 1,2 Hazardous Location LED light 120-240VAC 225XL-120-240X 1,2 1 “X” Indicates color: (A) Amber, (B) Blue, (C) Clear, (G) Green, and (R) Red 2 The light is powered from the same source as the speaker O P T I O N A L A C C E S S O R I E S S P E C I F I C A T I O N S • Operating Temperature: -40˚F to 104˚F / (-40˚C to 40˚C) • Two Relay Outputs rated at 8A @ 240VAC. Relay outputs can be programmed to cycle on and off, or come on continuously with the on time, off time, and total-time being programmable. They can also be programed to control strobe lights or other devices • Tone and voice compatible with Federal Signal Commander and UltraVoice controllers (Requires Commander version 14.8.x or higher) • Small size with rugged construction 7 " x 9 " x 10 " (178 mm x 229 mm x 254 mm) • Input: 24VDC, 5.15A maximum 120/240VAC, 50/60Hz, 1.5A/.78A maximum • Maximum Sound Pressure Level 120 dB (± 2 dB) @ 10 ' (130 dB (± 2 dB) @ 1 m) • Wired Ethernet • Adjustable volume control and ambient noise monitoring with auto-level adjustment • Wall or pole mount options • Up to four direct wire input for customer supplied panic button alarm • Requires minimal network bandwidth and uses TCP/IP protocol • Works with redundant Commander network servers for reliable fail-safe operation • Federal Signal Commander software provides full two-way control and status monitoring of the Informer100 • I-IP100DCX Net Weight: 16.2 lbs 7.35 kg • I-IP100ACX Net Weight: 19.2 lbs 8.71 kg O U T D O O R W A R N I N G S Y S T E M S T R A R I S Y S T E M S A M S