Product Selection Guide

2 9 2 Federal Signal’s Informer product line now includes an IP-enabled high-powered outdoor speaker. The Informer100 Speaker can be used as a notification device using tones and/or voice. Pair this model with a Federal Signal Commander ® system for additional capabilities; for instance, it can be equipped with up to four local alarm initiation devices to activate the unit locally and to activate the Commander controller for mass notification communications. The Informer100 Speaker has an internal 100 watt amplifier and driver to deliver intelligible voice messages from pre- recorded files or from the Federal Signal Commander VOIP network system. Ambient Level Monitor enables speaker to automatically adjust speaker volume in relationship to ambient noise level. It also has remote volume control for optimizing sound levels across your alerting area. Notifications and alerts can be live voice, pre-recorded messages and/or tone files. When used with optional notification software, alert messages initiated from the Informer100 Speaker can be sent to emergency personnel via email, SMS, hand-held radios; and can also be used to activate other Informer units and sirens. Informer100 Speaker includes two relay outputs for controlling strobes or other devices. It’s designed for outdoor use or large indoor structures; and available in 24VDC or 120/240VAC. All wiring interfaces accessible via internal connectors for quick and easy installation. The Informer100 Speaker is an ideal solution for existing notification systems where lack of coverage exists and the unit can be used as a call station where emergency alert buttons are required. The AX models include an updated NIC to improve connection time, device password management and network set-up. F E A T U R E S • Indoor/Outdoor IP enabled speaker with high-powered voice and tone • Available in 24VDC or 120/240VAC • Ambient SPL monitor with automatic volume control • Remote volume control • Broadcasts live voice, text-to-speech and prerecorded voice or tone files • Integral 100-watt amplifier and Ethernet interface simplifies installation • Optional scrolling message display • Remote firmware updates over Ethernet • 15 minute audio storage, with up to 250 .WAV files • Fully supervised using Commander software • Wall or pole mount available • Four initiation inputs, i.e. Panic button alarm or Non-Networked stand alone mode • Optional visual LED or strobe alerting devices available* • NEMA 4X outdoor rated • UL and cUL Listed for Class I, Division 2; Class II, Division 2; Class III • UL Marine Rated * Must use visual device rated 2A or less, and must be rated for use in a Hazardous Location Model I-IP100ACX and I-IP100DCX Hazardous Location Informer100 Speaker HAZARDOUS LOCATION RATING: I-IP100ACAX and I-IP100DCAX T-CODE AT MAXIMUM AMBIENT TEMPERATURE, ˚C Hazardous Location 40˚C Class I, Division 2, Groups A, B, C, D T5 Class II, Division 2, Groups F, G T6 Class III T6