Product Selection Guide

I N T E R C O M S 2645 Federal Signal Dr., University Park, IL 60484 Tel: +1 708.534.4756 Email: [email protected] www.fedsig.com | 361 S P E C I F I C A T I O N S H O W T O O R D E R Hazardous Location Digital Intercom Station (E2 Series) Operating Voltage: 24VDC nominal (line driven from ECHO control) Current Idle: 25 mA Current Connected: 100 mA Handset Microphone Type: Dynamic Handset Material: Molded Polycarbonate/ABS Blend Handset Cord: Stainless Steel Stubby Microphone Type: Dynamic Stubby Microphone Sensitivity: -54dBA Stubby Microphone Enclosure: Stainless Steel Audio Output: 2.7 Vrms , 1k load Volume Control via Keypad: 30dBA in ten steps Line Attenuation: 24dBA@160kb/s Max Loop Resistance: 170 Ohm Max Distance: 1.2 miles 2 km Max Cable: One twisted pair, non-shielded Cable Entries: 3 x 1/2”NPT (ø22mm) hole Operating Temperature Range: -50ºC to +65ºC Termination: Plug-in screw terminal, non-polar Relay Switching Capacity: 3A at 240VAC Specify Model: E2-HND – Station with Handset E2-SM – Station with Stubby Microphone (65mm) E2-HDS – Station with Headset E2-HND-4X – E2-HND in 4X enclosure (IP66) E2-SM-4X – E2-SM in 4X enclosure (IP66) E2-HDS-4X – E2-HDS in 4X enclosure (IP66) E2-GM1 – Gooseneck microphone, 260mm E2-GM2 – Gooseneck microphone, 440mm E2-GM3 – Gooseneck microphone, 590mm 5.47" / 139 mm 7.36" / 187 mm 10.51" / 267 mm Net Weight: 9.9 lbs 4.5kg Shipping Weight: 14.8 lbs 6.7kg Shipping Dimensions: 20.63 " x 14.13" x 13.63 " 524mm x 359mm x 346mm E2-HDS E2-SM-4X E2-SM