Product Selection Guide

3 2 8 F E A T U R E S • Two-way siren controller for 48VDC Sirens • Two-way radio control and status monitoring • Simultaneous two-tone sequential, DTMF, EAS, POCSAG, and digital AFSK decoding for security • Able to utilize multiple communication paths for redundancy • Controls mechanical sirens, including models 2001-130, Equinox, 508-128 and Eclipse8 • Solar options available • Push buttons for local activation • Landline, Ethernet (IP) or radio control • UL Listed for general signaling • DNV Certified Federal Signal DCFCTBD siren controllers are two-way digital, battery-operat for use with the Federal Signal 2001-130, Equinox, 508-128 and Eclipse8 sir interfaces with off-the-shelf two-way radio transceivers and communicates t can be used with radios utilizing single-tone, two-tone sequential, DTMF, PO as P25 and Tetra. The DCFCTBD controllers can be equipped with optional c satellite, and cellular. This makes DCFCTBD siren controllers compatible with communication method. There are four local inputs and four local push butt DCFCTBD models come equipped with four independent relay outputs that p g inputs, local pushbuttons or via the communications channels. Activation codes, relay timing, and optional warning sounds are programmed into the unit through a standard RS232 serial port or over-the-air from the central control point. The DCFCTBD siren controller offers six user programmable functions in addition to the five pre-set functions (arm, disarm, report, growl test and master reset). These controllers include sensors to supply information on the following areas of operation: AC power status, communications status, low battery status, intrusion, siren activation, current intrusion, siren rotation and local activation. Model DCFCTBD Two-Way Digital Controller for Electro-Mechanical Siren e e o C o vi ons for activation, plus a reset option. can be ro rammed to activate with local