Features

The Federal Signal UltraVoice® Indoor Controller, Model UVIC, is designed to deliver clean, clear, amplified audio to a network of speakers (sold separately), configured for indoor notification or evacuation. The UltraVoice Indoor Controller has been designed for high quality reproduction of live or pre-recorded voice and tone, providing the ability to automate testing and emergencies.

The UVIC is housed in a single NEMA1 style cabinet, with provisions for up to two 400 watt amplifiers (sold separately). Each controller requires 120VAC and contains two sealed lead-acid batteries, providing over 30 minutes of operation in the event power has been lost. The UVIC can be activated by land line, radio or IP from a remote location. Landline activation can initiate one of the 8 onboard functions by connecting a momentary dry contact closure (customer supplied) to the appropriate pc board mounted terminal block. These functions can contain a combination of tone and pre-recorded voice or Public Address. Public Address is available from the supplied microphone located inside the controller. If Radio Control of the UVIC is desired, an optional Federal Signal Encoder Model SS2000+ and base station radio (approved radio license required at time of order) must be added to the control package and is typically located where administrative control and activation resides. In either configuration, each function will remain active for 3 minutes as standard.

The UVIC controller is also compatible with our Commander® Software System status monitoring and activation software to “point and click” activation and local indication of alarms or fault conditions. Available functions to be displayed on a computer screen or captured to a database or printer are: AC Power, Battery Voltage, Charger Operation, Activation Current, Amplifier Status, Quiet Test, Intrusion and Local Activation.

Options: Ultravoice units may be equipped with a programmable RF receiver for remote control using MSK or DTMF protocols. Federal Commander Windows based software provides command and control for UltraVoice two way products

Specifications

Operating Temperature -22°F to 149°F (-30°C to 65°C)
Input Voltage 120 or 240VAC (UVIC240) +/- 10%, 50/60 Hz Single-phase
Input Current 5A AC, 45A DC Max
Operating Voltage 24VDC
Standby Time 3 days with 5 minutes reserve
Continuous Signal Time 30 minutes
Audio Output (UV400) 70 Vrms (nominal)
Dimensions H x W x D 8 31” x 17.36” x 13.62”
(787.4 mm x 440.9 mm x 345.9 mm)
Net Weight (no amplifiers) 64.55
200 lb

Ordering Information

Model Types
Model Description UPC
UVIC Indoor controller, no radio 782979702788
UVICH Indoor controller, two-way VHF (150-174) MHz 782979702818
UVICU Indoor controller, two-way UHF (450-474) MHz 782979702849
UVIC-IP Indoor controller, IP enabled 782979702825
UVIC-LL Indoor controller, landline 782979702832
UVIC240 Indoor Controller, 240VAC, No Radio
Accessories
Product # Description UPC
UV400 Amplifier, 400 watt 782979702733
DVR Digital voice recording fee 782979700777
DV480 Digital voice chip (8 minutes) 782979700753
TB-LL Telco base, landline 782979702672
UVARM UltraVoice audio relay module 782979702757
UVIC25ST Step-down transformer, 68-25Vrms 782979702801