Features

Continued Features
  • Fully supervised using Commander software 
  • Wall or pole mount available 
  • Four initiation inputs, i.e. Panic button alarm 
  • Optional visual LED or strobe alerting devices available* 
  • NEMA 4X outdoor rated 
  • UL and cUL Listed for Class I, Division 2; Class II, Division 2; Class III 
  • UL Marine Rated 
    * Must use visual device rated 2A or less, and must be rated for use in 
Federal Signal’s Informer product line now includes an IP-enabled high-powered outdoor speaker for hazardous locations. The Informer100 Speaker can be used as a notification device using tones and/or voice. Pair this model with a Federal Signal Commander system for additional capabilities; for instance, it can be equipped with up to four local alarm initiation devices to activate the unit locally and to activate the Commander controller for mass notification communications.
 
The Informer100 Speaker has an internal 100-watt amplifier and driver to deliver intelligible voice messages from prerecorded files or from the Federal Signal Commander VOIP network system. Ambient Level Monitor enables the speaker to automatically adjust speaker volume in relationship to ambient noise level. It also has a remote volume control for optimizing sound levels across your alerting area.
 
Notifications and alerts can be live voice, pre-recorded messages and/or tone files. When used with optional notification software, alert messages initiated from the Informer100 Speaker can be sent to emergency personnel via email, SMS, handheld radios; and can also be used to activate other Informer units and sirens.
 
Informer100 Speaker includes two relay outputs for controlling strobes or other devices. Informer100 is designed for outdoor use or large indoor structures; and available in 24VDC or 120/240VAC. All wiring interfaces accessible via internal connectors for quick and easy installation.
 
The Informer100 Speaker is an ideal solution for existing notification systems where lack of coverage exists and the unit can be used as a call station where emergency alert buttons are required.
 
 

Specifications

  • Operating Temperature: -40°F to 104°F -40°C to 40°C
  • Two Relay Outputs rated at 2A @ 30VDC or 250VAC. Relay outputs can be programmed to cycle on and off or come on continuously with the on time, off time, and total-time being programmable.They can also be programmed to control strobe lights or other devices
  • Tone and voice compatible with Federal Signal Commander and UltraVoice controllers (Requires Commander version 14.8.x or higher)
  • Small size with rugged construction
  • Input: 24VDC, 5.15A maximum; 120/240VAC, 50/60Hz, 1.5/.82A maximum
  • Maximum Sound Pressure Level 120 dB (± 2 dB) @ 10' (130 dB (± 2 dB) @ 1 m)
  • Wired Ethernet
  • Adjustable volume control and ambient noise monitoring with auto-level adjustment
  • Wall or pole mount options
  • Up to four direct wire input for customer supplied panic button alarm
  • Requires minimal network bandwidth and uses TCP/IP protocol
  • Works with redundant Commander network servers for reliable fail-safe operation
  • Federal Signal Commander software provides full two-way control and status monitoring of the Informer100

Ordering Information

Model Types
Model Description
I-IP100DCX 24VDC 100 watt wall mount
I-IP100ACX 120/240VAC 100 watt wall mount
I-IP100-PM Small (6" or less) Pole Mount Bracket
I-IP100-PMW Large (over 6") Pole Mount Bracket
I-IP100-OMNI Omni Directional Option for IP Speaker
Replacement Parts
Description Part Number
I-IP100 control board Q-20000314
AC Speaker Service Part Q-IP100AC
DC Speaker Service Part Q-IP100DC