Preventative Maintenance Program for: Outdoor Warning Sirens & Controllers

Introducing a NEW Preventative Maintenance Program for Warning Systems – Software, Sirens & Controllers

Warning systems are outdoor & indoor public life safety systems and the reliability of these systems is of utmost importance; which is why Federal Signal recommends proactive preventative maintenance, inspection and service of your outdoor sirens and controllers. Many issues that can only be caught during periodic inspections contribute to the performance of the system. To support this practice, we are introducing a new service plan to assist customers that are in need of siren service and do not currently have a service provider. The plan includes a full inspection of all siren components and includes minor repairs.
  • Work will be performed by factory-trained technicians
  • Recommendations will be made for future maintenance
  • The inspection provides documentation that your system is up to factory specification

 Annual Preventative Maintenance Plan includes:

    • Inspection of all electrical and mechanical connections. Minor repairs or recommended corrective action plan included
    • Perform driver inspection and repair as required
    • Verify power output of amplifiers
    • Verify operation of control board or circuits
    • Verify proper voltages are present
    • Check charger(s) for proper voltage
    • Battery inspection for age, voltage, and possible replacement (cost of battery replacement not included)
    • Check/verify wiring and fuses for all circuits
    • Verify antenna connector integrity and mounting
    • Clean debris from cabinets
    • Verify conduit is sealed with RTV to prevent battery outgassing into the control cabinet
    • Verify AC/Solar, battery, battery cables, radio/Cell/Sat operation
    • Verify AC disconnect/breaker in working condition
    • Verify battery heater operation
    • Verify intrusion switch is operating and repair as required
    • Inspect Siren installation for vertical orientation; will recommend corrective action if required
    • Inspect chopper/rotate motor and brushes for wear (length), dust,  and operation. Minor repairs, cleaning or recommend corrective action plan included
    • Check rotation and chopper sensors
    • Inspect collector ring and brushes for wear. Includes grease application and repair as required
    • Evaluate the rotate motor and clutch for operation and adjust and repair as required
    • Verify contractor operation and quality of contacts
    • Inspect all painted surfaces and repair as required
    • Inspect horn screen and repair as required
  • This maintenance program will cover (5) Years
  • The program is intended for Notification Systems with 25 assets or less (e.g. 2 Control Points & 23 Sirens)
  • The program will include (5) Preventative Maintenance Visits (1-visit per year)
  • There will be three-part numbers:
    • ISYS-PM-SERV-5S (Standard Preventative Maintenance Plan)
      • Battery Replacement is optional and will be quoted according to system type/size
    • ISYS-PM-SERV-5P (Premium Preventative Maintenance Plan - Includes 24/7/365 remote support)
      • Battery Replacement is optional and will be quoted according to system type/size
    • ISYS-PM-WARR-5P (Includes ISYS-PM-SERV-5P features + Extended Hardware Warranty with Onsite Warranty Services)

  • All opportunities will be reviewed by the Manager of Technical Services during the quoting stage
  • Final sell price will consider system equipment, system size, and other contributing items
  • Sell price calculated by the Manager of Technical Services

Don’t delay in signing up your customers for this new plan. Call 1-800-548-7229 or email [email protected] for a quote. For any questions regarding this program, please contact Nick Desautels  – Call 1-708-587-3112 or email [email protected]